VENSYS Controls Rotor Position on Wind Turbines with TURCK uprox+ Sensors

    MINNETONKA, MN, November 22, 2010 /24-7PressRelease/ -- During the Olympic Summer Games in August 2008, China appeared as an environmentally-friendly host. In addition to the use of solar energy and terrestrial heat, the organizers relied primarily on wind energy, which alone was intended to cover 20 percent of the energy demand of all Olympic event facilities. The electricity is generated in the Beijing-Guanting Wind Park where 43 wind turbines from Chinese wind energy market leader Goldwind are in operation. The wind turbines are provided by VENSYS Energy AG, produced 7,000 km away in the city of Saarland, Germany.

Worldwide growth
VENSYS wind turbines that were built and tested in Saarbrucken, Germany, are currently turning in the Canadian Higgins Mountain Wind Plant, as well as in the German city of Grevenbroich. The market opportunities for VENSYS wind turbines are particularly lucrative because the generator design and construction allows for sufficient wind production even in low wind regions, believes Board member Dietmar Knuenz. The exciter field is generated by the permanent magnets made of neodymium-iron-boron (NdFeB) attached directly on the rotor shaft. Therefore, energy normally used to excite the rotor can now be sent to the grid.

"In the design of our wind turbines, we rely on constant part reduction by limiting turbine construction to a few high quality and tested components," explains Knuenz. "The VENSYS generator fulfills all the functions of the classic drive train. We no longer use high-maintenance components that are prone to malfunction, such as transmissions, intermediate shaft and couplings. By using permanent magnets, we no longer need excitation coils, slip ring transmission and DC generation." The pitch drive with low-wear toothed belts led to further savings, making lubrication and sealing redundant.

VENSYS Energy AG does not only set new standards when it comes to reliability and maintenance-friendliness, it makes no compromises in terms of safety. With regard to safety, the pitch control system is among the most important components of a wind turbine. The system measures, monitors and controls the working angle of the rotor blades on a wind turbine, which can change the power consumption. For example, pitch control allows the rotor blades to turn into the wind when starting up. During operation, the output can be held constant despite changing wind conditions by adjusting the working angle. However, if a storm occurs, the pitch control rotates the rotor blades automatically out of the wind in order to prevent damage.

Sensors guarantee reliability
"A malfunction can have fatal consequences," says Dr. Stephan Joeckel, Director of Electro-Technology at VENSYS. No wonder that the reliability of the measurement technology in this field is the highest priority. That is the reason why VENSYS Energy AG decided in favor of inductive sensors from TURCK. In each wind turbine, six uprox + sensors--two on each blade--simultaneously determine the precise position of the rotors. To do so, each sensor records the end position of the rotor blades. A seventh sensor determines the position of the maintenance hatch of the turbine. With the data from all the sensors, the control system then ensures that each rotor blade is in the correct position. The power is transmitted between the motor and the rotor blade via a lubricant-free and maintenance-free toothed belt. In this process, the power is distributed across several teeth, thus minimizing wear and increasing safety and reliability.

In a single year, VENSYS equipped 60 wind turbines with TURCK sensors without encountering any difficulties. "So far, we have only had good experiences," confirms Dr. Joeckel. "In addition to the high level of reliability, high quality and an attractive price-performance ratio, the high resistance to the high EMC was also an important factor in the decision in favor of the uprox+ sensors. Because of their direct proximity to the generator of the wind turbines and the risk of lightning, the topic of EMC plays a significant role in this application area."

Since wind power plants are frequently located in coastal regions with relatively high particulate concentrations, all plant components must meet particularly high requirements when it comes to impermeability. In the standard design, uprox+ sensors are encapsulated in a chrome-plated brass housing with an IP68 degree of protection--meeting the high requirements of the VENSYS developers.

For more information, visit: www.turck.us; http://www.vensys.de.

Next Communications is a full service marketing communications firm specializing in print, online and search marketing. For further information, contact Dennis Gallaher at 952-934-8220 or [email protected] or www.nextcom.com.

# # #